Heres the passanger side painted. And with the shock installed..
I mounted the wheels, everything works fine, no rubbing.
Here´s a video of the first test. With 3/8 valves, the movement is fast enough, almost too fast to control.
The upper edge of the windshield is too far from the lip on the roof:
This gap may be possible to fill with windshield glue adhesive, but the stainless trim is not going to fit well..
I was wondering if I´m able to lift the center of the roof 1cm (almost half an inch)...
If I just make some relief cuts in the back side and then lift the roof gently....?
Ei kommentteja:
Lähetä kommentti